Each week our Water System Chemist, assisted by our Watershed Program Manager or one of our environmental interns, conducts sampling and monitoring of the water quality in Otisco Lake. They utilize visual and analytical methods to monitor and evaluate the quality of the lake and its tributaries before it reaches our treatment plant. The water quality team is out on the lake observing any potential issues such as algal blooms, turbidity plumes, or other conditions that may lead to deteriorating water quality.
Using a Kemmerer 1200 water sampler, water samples are collected from three locations at various levels (typically 5,10,15 or 20 feet) below the lake surface. Temperature and turbidity are recorded for each sample. Water clarity is also measured at each location using a Secchi disk. Each sample is then analyzed at OCWA, using a microscope to identify and quantify algae species. Additionally, these weekly samples are sent to a third-party laboratory for microcystin analysis.
These efforts allow us to plan ahead and be prepared for changes in the raw water quality. The data collected is trended and reviewed with our Principal Water Plant Operator who makes adjustments in our treatment plant process as necessary.
This is just one aspect of all the efforts that go into producing water that is not only high quality but also the best tasting drinking water in New York State!

Water System Chemist collecting sample from lake

Water System Chemist injecting sample into collection bottle

